The Sliding Door Of The Wardrobe Is Not Designed With A Buffer Device

2023-03-10 Views:1738

There are many hardware accessories in the sliding door wardrobe, each of which plays an important role. If there is no wardrobe sliding door buffer in the sliding door wardrobe, it will be very dangerous when the sliding door wardrobe is closed. In the process of the sliding door, the effect of inertia will rush to the side with great force, which will not only cause certain damage to the sliding door, but also cause a lot of noise in danger, so we cannot ignore the role of the buffer installed in the sliding door wardrobe. .

The Benefits of Designing Wardrobe Sliding Door Buffers

1. When the door panel is a certain distance from the frame, it will slowly and automatically close; it has a number of patents for damping technology and automatic closing technology, with a service life of more than 50,000 times;

2. The anti-jump wheel prevents the light door from jumping off the rail;

3. Automatic traction reset function device after decoupling to avoid failure of damping after decoupling (no damping buffer function);

4. The installation of the positioner is simple and quick, and one-button multi-function adjustment (convenient adjustment and control of the anti-jump pedal and the height of the positioner).

Wardrobe sliding door installation buffer precautions

1. For different upper rails, the width of the two wheels needs to be adjusted. There are corresponding size scales on the back of the product, such as 35mm, 37.5mm, 39mm. If the width of the upper rail is 35, the two pulleys need to be adjusted to 35 scales; If the width of the upper rail is 37.5, it needs to be adjusted to the scale of 37.5; if the width of the upper rail is 39, it needs to be adjusted to the scale of 39. The default width of the product is 39mm.

2. If the sliding door frame adapts to the center wheel, the two end fixings of the sliding door buffer wheel need to be adjusted to the center position; if the sliding door frame adapts to the eccentric wheel, the two end fixing parts of the sliding door buffer wheel need to be adjusted to the offset N mm position. Product default center wheel position.

3. The sliding door buffer wheel is divided into left and right. When installing, as long as the bayonet is facing outwards, it is correct.

4. Generally, one sliding door is installed on the side; if the customer needs to install on both sides, one door can also be installed with two. According to customer needs